Ok so I picked up this little jewel for next to nothing had to drive 250 miles to get it looks rough but its a Danuser f8 been building these since the 1940's this one was made in 1977
Installed new timken bearings and races and national oil seals 132.00 and a new driveshaft 350.00 the old was rated at 35 hp my tractor is a 50hp dropped the differential of at the machine shop and had it vatted 20.00 and took the frame to sandblast and powder coat 200.00
here it is back together and mounted and on the trailer also welded a mount on the trailer for the stinger on the bottom of the auger so i could take the pressure of the hydraulics during transport