Nice job beast!
Nice job beast!
"The clever cat eats cheese and breathes down rat holes with baited breath." W. C. Fields
Sasquatch (06-24-2024)
Inor (06-24-2024),Mad Trapper (06-24-2024),Sasquatch (06-24-2024)
Michael_Js (06-24-2024),Prepared One (06-24-2024),Sasquatch (06-24-2024)
Mad Trapper (06-24-2024),Sasquatch (06-24-2024)
Sasquatch (06-24-2024),T-Man 1066 (06-24-2024)
Mad Trapper (06-24-2024),Michael_Js (06-25-2024),Sasquatch (06-24-2024)
Sasquatch (06-24-2024)
Sasquatch (06-24-2024)
Sasquatch (06-24-2024)
Nice work on the chair!
For outdoor finish here, I have found this stuff works pretty well:
https://www.amazon.com/MESSMERs-MC-5...s%2C171&sr=8-4
It is a bit on the pricey side, but does seem to do a pretty good job protecting from the sun. (At least here, the sun is far more damaging than water).
The only thing I did a bit different than the instructions call for is to thin it out about 2:1 (2 parts finish to 1 part mineral spirits). Then I applied it with a rag instead of a brush. Wait a full 2 days for it to dry. Then do at least one more coat (preferably 2 or even 3) at full strength, drying 24 hours between coats. The full strength coats, you can use a brush.
Admin for the most politically correct site on the web. Welcome to the OTP!
Follow our house build: http://www.mtacres.net/